Shoei RF-1400 Helmet

RF-1400 Helmet - Black Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Black Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Black Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Black XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Black 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey XS

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow XS

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black XS

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Black 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic XS

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White XS

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White Small

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White Medium

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White Large

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White 2XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - White 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Black 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Basalt Grey 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Brilliant Yellow 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)

RF-1400 Helmet - Matte Blue Metallic 3XL

RF-1400 Helmet

SHOEI’s RF line has a rich heritage, dating back nearly four decades. Always focused on innovation, SHOEI released the 1400 model in 2021. This road riding helmet was tested in SHOEI’s wind tunnel facility, where aerodynamics and ventilation were examined and refined. Six air intake and four exhaust vents are designed to keep your head cool, while upward lift and drag were reduced in comparison to its predecessor, the RF-1200.

A new, airtight window beading offers a wind and waterproof seal of the shield. A clear view and protection against the sun’s damaging UV rays is also provided by the CWR-F2 shield, and the release button is located in the center of the helmet for a smooth lift.

Multiple layers of fiberglass, along with a dual-layer, multi-density EPS liner are engineered to deliver protection during impact, and the exclusive Max-Dry interior material absorbs and dispels sweat two times faster than conventional nylon interiors. The liner is also removeable and washable. Weighing 3 pounds 10 ounces, this Snell M2020D and DOT approved helmet is available in multiple colors and graphics.

• Aerodynamic Performance
• Multi-Ply Matrix AIM+ Shell
• Enhanced Vision
• Optimized Ventilation System
• Dual-Layer Multi-Density EPS Liner
• 3D Max-Dry Interior System II
• CWR-F2 Shield & Base Plate System
• Emergency Quick Release System (E.Q.R.S.)
• Advanced Noise Reduction
• Standards: Snell M2020D and DOT Approved
• Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply)