This universal Garage Door Opener is compatible with the Chamberlain / Lift Master models listed below.
It was designed to be used in most any Club Car, EZ-Go, Icon, Evolution, Star Golf Cart, but can be used for Motorcycles, ATV's, UTV's, Side by Sides, Automobiles and more!
It comes WITHOUT an external push button switch, but we offer 5 different colors of LED Lighted MOMENTARY Switches thare are compatible with this unit. See image of switches mounted in dash.
However you can use your own MOMENTARY switch, as you would just connect it to the 2 lead wires from the unit, as shown in the images.
** This is best paired with our FRONT harness, as you will draw 12v power from the cart, to light your switch/switches. **
The unit is typically hidden below your dash, and the button would be mounted IN your dash, as shown in the images.
Equipped with a 240mAh large-capacity lithium battery and a third-generation intelligent low-power chip, this remote offers extended use and superior compatibility with various garage door motors.
Featuring Auto-Seek Rolling Code technology, this garage door opener remote provides top-notch security and anti-theft protection, ensuring your garage is safer than ever.
The garage door opener remote works with the latest Security+ 2.0 rolling code technology to reduce radio wave interference and providing protection against intruders by generating new security codes every time the garage door remote is used.
Compatible with: Chamberlain, Lift Master and Craftsman garage door openers made from 1993 to the present, supports 5 Learn Button (Yellow, Purple, Red, Orange, Green garage opener).
Does NOT work for any DIP Switch system.
NOT Compatible with Genie/Overhead door openers. See our other ad for the Genie model
Instructions for Pairing Garage Door Opener
** See images for more information on pairing your new Birdie Pro Remote to your Garage Door Opener, but we will only be programming button 1/I as that is the button your Remote Switch will use.
1. Remove 4 screws from the Garage Door Opener Box or if the box has no screws just separate the 2 halves (various project boxes are used to keep up with demand), to access the internal Garage Door Opener Board and Buttons. This will be needed to program the opener.
2. Confirm the correct COLOR of the LEARN BUTTON on your Garage Door Opener
3. Press and Hold buttons 2/II and 3/III (Program Buttons that are closest together) at the same time until the LED on the front of the opener turns on, flashes 4 times, and turns off. Quickly move to Step 4
4. Press and Release Button 1/I (Program button that the remote switch is wired to) the correct number of times that corresponds with the Color of your LEARN BUTTON from Step 1. Yellow/1, Purple/2, Orange/3, Red/Also 3, Green/4.
5. This is IMPORTANT! Now Press Button 3/III to exit programming mode.
6. Press and Release the LEARN BUTTON on the Garage Door Opener.
7. Press and HOLD Button 1/I until the Garage Door Opener Light Flashes or you hear 2 clicks.
8. Reconnect the 2 halves of the Garage Door Opener Box, and replace / tighten the 4 screws removed in step 1. Or snap back together (various project boxes are used to keep up with demand)
9. Connect your Birdie Pro Momentary LED Lighted Switch, or the switch of your choice! (see instructions enclosed with Opener)
10. Enjoy your Birdie Pro Harness!
Notes: Birdie Pro and Motomentum do NOT assume any responsibility for the installation of any of their products. If you do not feel comfortable installing this or any Birdie Pro product, please consult a professional Golf Cart Mechanic or Shop.